RESEMIN

Production Long-Hole Jumbos, Front Face Jumbos, Roof Bolters

Your best choice for jumbos and bolters in underground mining.

They're our choice too. That's why Rock-Tech is the Eastern Canada Distributor for the RESEMIN line of underground drilling products.

 

WHY RESEMIN?

 

  • Simple and robust design
  • Reliable in extreme conditions
  • High quality standards (ISO 9001)
  • Short lead times
  • Remarkably cost effective

Production Long-Hole Jumbos

MUKI LHP

Small and effective. Electro-hydraulic micro drilling rig made for long hole drilling, with a pendulum arm style boom that allows precise and smooth movements for parallel holding.

 

This equipment has a 2500 series long hole drilling feed with 2 stingers and hydraulic clamp. Equipped with a Montabert HC 50 drifter (14 kW), a digital inclinometer for measuring angles in included.

 

Ready for various tasks such as Sub Level Caving and Benching, the Muki LHP is effective viewed from any angle.

MUKI LHBP-2R

Heavy work will not be a problem. The MUKI LHBP 2R is an electro-hydraulic rig for long hole drilling, especially for sublevel stoping, sublevel caving and benching. Equipped with a hydraulic boom with parallel holding, two rotation units (360° and 220°), a 2500 series Feed with 2 stingers and hydraulic clamp.


Articulated 4WD chassis for heavy-duty application, self-propelled with diesel engine, electro-hydraulic system for drilling.

RAPTOR 44-2R

RAPTOR 44 is an electro-hydraulic drilling rig for long hole drilling with a 4AP hydraulic Boom with parallel holding. In addition, it has a barycenter system to automatically synchronize the drilling and rotation axes, thus facilitating radial drilling with shorter positioning times.

 

Equipped with the most modern drifter in the market, Montabert HC 95LQ drifter (24 kW) incorporating Back Hammering to prevent rods stuck. It has 2 unit rotations for drilling very close to the ribs.

RAPTOR 55-2R

 

Resemin’s RAPTOR 55 2R is an electro-hydraulic equipment for long hole drilling. It has 5APC hydraulic Boom with parallel holding and uses a Montabert HC 95LQ drifter (24 kW) with Back Hammering to prevent rods stuck.

 

Its BARYCENTER system for automatic synchronization of drilling and rotation axes helps to facilitate the radial and parallel drilling with shorter positioning times. High stability with a maximum drilling length up to 35 m, diameters up to 102 mm, reaming up to 127 mm. It has 2 unit rotations for drilling very close to the ribs.

Front Face Jumbos

MUKI FF

MUKI FF is a front face electrohydraulic drilling rig of 1.05 m width, recommended for small sections from 1.5 m (W) x 2.0 m (H) up to 3.5 m x 3.5 m. In addition, because of its size, it can also operate as an Upper Drill for Cut & Fill.

 

It comes with a hydraulic boom of square section and a telescopic feed with options to work with 8 - 10 ft drill rods, 6-10 and 8-10 ft retracted telescopic feed. Equipped with Montabert HC 50 drifter (14 kW).

TROIDON 44 XP

With a simple but effective design, the TROIDON 44 is a front face drilling rig of a 1.3 m width, recommended for reduced sections from 2. 5 m x 2.5 m up to 4.5 x 4.5 m. Equipped with Montabert HC 95LM drifter (21 kW), the fastest and lowest maintenance cost drifter. Its boom with automatic parallelism and its simple design, without technical complications, make TROIDON 44 a reliable machine with the best Cost/Benefit in the market.

TROIDON 55 XP

This electro-hydraulic front face drilling rig of 1.85 m width is prepared for tunnelling in underground mining and civil works for medium sections from 3.5 m x 3.5 m up to 5.3 x 5.3 m.

 

It is equipped with a modern Montabert HC 95LQ drifter (24 kW), the fastest drifter in the market, and with Back Hammering to prevent rods stuck. Heavy-duty, articulated 4WD chassis, self-propelled diesel Deutz engine and equipped with hydraulic boom with parallel holding.

TROIDON 66 XP

TROIDON 66 is a two-boom, electro-hydraulic drilling rig with automatic parallelism and a 46 m2 coverage area. It is equipped with Montabert HC 95LM drifter (21 kW), incorporating Back Hammering to prevent rods stuck.

 

Its design allows its main components to be located inside the drilling rig: Cable reel, water hose reel, water pump and compressor. In addition, it is highly reliable due to its direct control hydraulic system with control piloted hydraulically.

Roof Bolters

BOLTER 99

In Resemin we have created the Bolter 99 for mechanized roof bolting and meshing in medium sections from 3.5 m x 3.5 m up to 8.2 m high. Equipped with T99 Bolting Turret to install Resin and Cement cartridges, Split Set, Hydrabolt, Swellex and Phyton bolts. It has the option of a mesh manipulator arm for mechanized meshing. All the operation combined in a safe way for the operator.

SMALL BOLTER 99

Small Bolter 99 allows efficient and safe reinforcement of roof structures in underground mines, ideal for sections from 3.5 m up to 5.3 m high.

 

Equipped with T99 Bolting Turret to install Resin & Cement cartridges, Split Set, Hydrabolt, Swellex and Phyton bolts, allowing 7, 8 and 10 ft bolts to be installed. The greatest versatility in the market.

Eastern Canada Distributor for the RESEMIN line of underground drilling products.